Fritz Reef Pro Mix Complete Sea Salt Bag - 130 Gal

Fritz RPM Premium Sea Salt is designed to make 130 gallons of clean and clear water for your marine tank. This product is a complete marine salt mix with enhanced Calcium, Magnesium and Potassium Levels.It contains essential major, minor, and trace elements in precise ratios for the health of marine life. For best results It is important to follow proper mixing instructions when using salt with elevated trace elements, like FritzPRO RPM. When Mixing RPM, it is best practice to use RO/DI water, quality checked by a TDS meter (TDS should be less than 10ppm, 0 is preferred). Fill Clean Mixing container (dedicated for aquarium saltwater) with desired amount of Saltwater to be prepared. We recommend using water between 70 – 75 degrees before adding RPM. Slowly add RPM into the RO/DI to avoid a sharp increase in temperature, and an over saturation of Salt. This helps to prevent precipitation of Calcium, Alkalinity and other trace elements. It is best practice to use a mixing pump and an air stone when mixing RPM. This will also help to avoid concentrated areas of material and precipitation. Using a properly calibrated refractometer, bring the salinity between 28-35 PPT (1.021-1.026 Specific Gravity). Once mixed to a clear solution, add a heater to the water to bring to the current temperature of your aquarium (78-80). Please allow 2 hours before doing a water change. If water does not mix clear please contact us for further mixing tips before doing a water change. DO NOT MIX DRY SALT IN SYSTEMS WITH LIVESTOCK PRESENT STORAGE: Reseal container tightly to keep moisture out of dry mix. Store in a cool dry place.